onetouchtools

	introduction of products	Samhwa Co., in order to improve the discomfort of the Baby grinder users, is the ground-breaking one, which, by putting the One touch coupler in the previously used grinder, it can separate and insert the consumptive side tools, such as the Baby brush, the Baby stone, the First tilling rotary brush, within one second without extra changing tools.
	principle of operation	The hexagon insertion stick composing the grinding holder is combined in the hexagon groove of the Coupler board. The more strongly the rocking ball and the coil spring of the sliding part of the groove of the lower insertion stick pull the grinding holder, the more fast the grinding revolves, which makes the centers focused on one point and the insertion makes sure.

BEFORE

AFTER

1.The merits of the products
The lowering the revolution in high turning in grinding releases the tiredness even with long working hours, not only the working effectiveness can be improved but muscle-bone illness can be prevented. Especially, the safeness and comfort are emphasized.

2.The characteristics of the products

(Safeness)

◎ With the technical characteristics of the inner Coupler, the hooking groove of the grinding holder can be pulled and the empty revolution, caused by the over-operation in grinding, can be controlled by employing the hexa-Sanc., and you can work more safely without the shivering of the Grander or the scattering of the grinding holder.

◎ In case of the previous grinding holer, you need to wear the face protection tools and gloves and separate the Grander and air hose. Otherwise, the workers can be injured because of the mis-operation of the tools. However, those kinds of the accidents can be prevented in that the workers disintegrate and insert the grinding holder more safely and comfortably.

◎ The accident of the losing of the Wrench, changing tools, or falling down in high space working can be prevented.

(Comfort)

◎ Without extra changing tools, you can disintegrate the grinding holder just within two or three seconds which makes you reduce the empty efforts.

◎ You can change the grinding holder easily even in narrow space or bad condition without working on the ladder or on the chief.

◎ You need not have the Wrench, the changing tools, in Grander working and the discomfort or the delay in changing caused by losing the Wrench can be reduced.


The name of the products	Size	The purpose of theuse	Remarks(the results in the working shop tests)
SH-050	0.25mm	The elimination of paint or welding sluger	the changing time	the previous products : 60seconds	the reduction of the changing time reduces of the empty efforts by 12 times.
				the Samhwa: 5 seconds
			The disintegration and insertion without extra changing tools can reduce the over-moving due to narrow working shop and make the accident be prevented.


The name of the products	Size	The purpose of theuse	Remarks(the results in the working shop tests)
SH-030	the general one (black)	the grinding in the narrow working shop.	the changing time	the previous products : 60 seconds	the reduction of the changing time reduces of the empty efforts by 12 times.
				the Samhwa: 5 seconds
			The disintegration and insertion without extra changing tools can reduce the over-moving due to narrow working shop and make the accident be prevented.


The introduction of the products	The smoothness by using the Advanced USA(Samhwa Co.) and the shivering of the grinding working can be reduced. The blade won't be broken even with long working, thanks to the proper gap of the blade. It is helpful in working effectiveness or cost reducing.
The principle of the operation	You should tighten the products wholly because the insertive Coupler is the consumptive one in the more resisting grinding.


The name of the products	Size	The purpose of theuse	Remarks(the results in the working shop tests)
SH-020	25mm/ #80	the previous coating	the changing time	the previous products : 60 seconds	the reduction of the changing time reduces of the empty efforts by 12 times.
				the Samhwa: 5 seconds
			The disintegration and insertion without extra changing tools can reduce the over-moving due to narrow working shop and make the accident be prevented.